MikroTik XQ+31LC10D 100G QSFP28 Module (XQ+31LC10D)

MikroTik XQ+31LC10D 100GBASE-LR4 QSFP28 Optical Transceiver
Overview: A QSFP28 optical transceiver for MikroTik RouterOS platforms, providing 100GBASE-LR4 connectivity over single-mode fiber up to 10 km for 100G backbones, data centers and carrier aggregation. It is coded with MikroTik-recognized EEPROM and identifies as XQ+31LC10D on RouterOS interfaces.
Description: The XQ+31LC10D is a QSFP28 form-factor optical transceiver operating to the 100GBASE-LR4 standard. Its four-channel LAN WDM design multiplexes 1295.56, 1300.05, 1304.58 and 1309.14 nm wavelengths onto a single duplex LC/UPC single-mode fiber pair. A cooled EML transmitter array and PIN photodiode receiver support a 103.125 Gbps Ethernet line rate using 25.78125 Gbps NRZ per lane. The 6.3 dB average link budget supports up to 10 km of G.652 SMF reach.
The module ships with MikroTik-recognized EEPROM coding, so RouterOS Winbox, CLI and web UI display the expected vendor and part-number strings. MikroTik's XQ+ QSFP28 platforms include CRS504-4XQ-IN, CRS504-4XQ-OUT, CRS510-8XS-2XQ, CRS518-16XS-2XQ, CRS520-4XS-16XQ, CCR2216-1G-12XS-2XQ, RDS2216-2XG-4S+4XS-2XQ, CRS812-8DS-2DQ-2DDQ and CRS804-4DDQ. RouterOS does not restrict MSA-compliant third-party modules, so the optic can come up at 100G without an override command.
SFF-8636 DDM/DOM telemetry exposes TX/RX optical power, module temperature, supply voltage and laser bias current. Host FEC support helps monitor link integrity in 100G Ethernet and OTU4 applications. Maximum power consumption is 3.5 W and the 0°C to 70°C operating range suits typical aggregation and small data-center environments. Because 100GBASE-LR4 is an IEEE 802.3ba standard, the module interoperates with any standards-compliant 100GBASE-LR4 port at the far end regardless of chassis vendor.
Key Highlights:
- QSFP28 100GBASE-LR4 optical transceiver with 100G Ethernet and OTU4 support.
- Up to 10 km reach over duplex LC/UPC single-mode fiber with a 6.3 dB link budget.
- Four-channel LAN WDM 1310 nm band; EML laser transmitter and PIN photodiode receiver.
- SFF-8636 DDM/DOM telemetry and Host FEC support.
- MikroTik-recognized EEPROM coding; identifies as XQ+31LC10D in RouterOS.
- Maximum 3.5 W power consumption and 0°C to 70°C standard operating temperature.
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | MikroTik |
| Model | XQ+31LC10D |
| Product Group | SFP Modules |
| Form Factor | QSFP28 |
| Modulation | NRZ (Non-Return to Zero) |
| Media Type | Single-Mode Fiber (SMF) |
| Connector | Double LC/UPC |
| Fiber Count | Duplex |
| Maximum Distance | 10 km |
| Average Link Budget | 6.3 dB |
| TX Wavelength | 4-channel LAN WDM (1295.56 / 1300.05 / 1304.58 / 1309.14 nm) |
| RX Wavelength | 4-channel LAN WDM (1295.56 / 1300.05 / 1304.58 / 1309.14 nm) |
| Supported Data Rate | 112 Gbps |
| Supported Ethernet Applications | 100G Ethernet (103.125 Gbps) |
| OTN Applications | OTU4 (112 Gbps) |
| DDM/DOM | Supported |
| FEC | Host FEC Supported |
| Transmitter Type | EML Laser |
| Receiver Type | PIN photodiode |
| Average Launch Power (Min/Max, per lane) | -4.3 dBm / 4.5 dBm |
| Extinction Ratio (Min) | 4 dB |
| Average Receiver Sensitivity (Min/Max, per lane) | -10.6 dBm / -8.6 dBm |
| Receiver Overload | 5.5 dBm |
| Operating Temperature | 0°C - 70°C |
| Storage Temperature | -40°C - 85°C |
| Relative Humidity | 5% - 85% |
| Maximum Power Consumption | 3.5 W |
| Power | +3.3V single power supply |
| Supported MikroTik Platforms | CRS504-4XQ-IN, CRS504-4XQ-OUT, CRS510-8XS-2XQ, CRS518-16XS-2XQ, CRS520-4XS-16XQ, CCR2216-1G-12XS-2XQ, RDS2216-2XG-4S+4XS-2XQ, CRS812-8DS-2DQ-2DDQ, CRS804-4DDQ |
| Compliance | CE, RoHS, Class 1 FDA and IEC60825-1 Laser Safety, IEEE 802.3ba, IEEE 802.3bm, 100GBASE-LR4, QSFP28 MSA, SFF-8636, SFF-8665 |