MikroTik wAP ax LTE7 kit Wi-Fi 6 LTE Outdoor Router (wAPGR-5HaxD2HaxD&R11e-LTE7)
MikroTik wAPGR-5HaxD2HaxD&R11e-LTE7 Outdoor Access Point
Overview: The MikroTik wAP ax LTE7 kit is an IP66-rated outdoor access point that combines Wi-Fi 6 and CAT7 LTE connectivity for challenging environments such as rural sites, gas stations, bus stops, and private premises. It is suited to WISP, SMB, and field deployments requiring Gigabit Ethernet, PoE powering, and RouterOS v7 management.
Description: The device is built on an IPQ-5010 dual-core ARM 32bit CPU with 256 MB RAM and 128 MB NAND storage, and it runs RouterOS v7. The dual-band, dual-chain 2x2 MIMO Wi-Fi 6 radio delivers up to 574 Mbit/s on 2.4 GHz and 1200 Mbit/s on 5 GHz, with antenna gain of 6.9 dBi for 2.4 GHz and 7 dBi for 5 GHz. On the mobile side, the CAT7 LTE modem supports 300 Mbps downlink and 100 Mbps uplink, 2x2 DL MIMO, 1x1 UL MIMO, Band 28 700 MHz and Band 32 1500 MHz, plus 2xCA carrier aggregation.
Two 10/100/1000 Ethernet ports are provided, and the unit can be powered through 802.3af/at PoE-IN or a 12-57 V DC jack with a maximum power consumption of 13 W and passive cooling. It is tested for ambient temperatures from -30°C to 70°C and uses a next-generation IP66 weatherproof enclosure with a concealed anti-vandal screw and inside-the-case wall or roof mounting. The low-profile design and marked rear cable pass-through indentation support discreet and secure installations.
RouterOS v7 supports the new CAPsMAN for centralized management of multiple devices. The dual-core ARM platform and 256 MB RAM are configured to support VPN use and routing tasks. The wAP ax LTE7 kit is intended for rural broadband, field access, temporary connectivity points, and outdoor deployments that require both Wi-Fi 6 and CAT7 LTE connectivity.
Key Highlights:
- Dual-band, dual-chain 2x2 MIMO Wi-Fi 6: 574 Mbit/s on 2.4 GHz and 1200 Mbit/s on 5 GHz.
- CAT7 LTE: 300 Mbps downlink / 100 Mbps uplink, expanded band support including B28 and B32, and 2xCA.
- IPQ-5010 dual-core ARM CPU at 800 MHz, 256 MB RAM, 128 MB NAND, and RouterOS v7.
- 2x Gigabit Ethernet; 802.3af/at PoE-IN and 12-57 V DC jack for dual powering options.
- IP66 outdoor enclosure, passive cooling, -30°C to 70°C tested temperature range, and concealed anti-vandal screw.
- CAPsMAN centralized management and a dual-core ARM platform that supports VPN use.
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | MikroTik |
| Model | wAPGR-5HaxD2HaxD&R11e-LTE7 |
| Product Group | Outdoor Access Point |
| Architecture | ARM 32bit |
| CPU | IPQ-5010 |
| CPU Core Count | 2 |
| CPU Nominal Frequency | 800 MHz |
| CPU Threads Count | 2 |
| RouterOS License | 4 |
| Operating System | RouterOS v7 |
| RAM | 256 MB |
| Storage | 128 MB NAND |
| MTBF | Approximately 200,000 hours at 25°C |
| Tested Ambient Temperature | -30°C to 70°C |
| Number of DC Inputs | 2 (DC jack, PoE-IN) |
| DC Jack Input Voltage | 12-57 V |
| PoE-IN | 802.3af/at |
| PoE-IN Input Voltage | 18-57 V |
| Max Power Consumption | 13 W |
| Cooling Type | Passive |
| 3G Category | R8 (DL: 42.2 Mbps; UL: 5.76 Mbps) |
| 3G Bands | 1 (2100 MHz), 3 (1800 MHz), 5 (850 MHz), 8 (900 MHz) |
| LTE Category | 7 (DL: 300 Mbps; UL: 100 Mbps) |
| LTE MIMO DL | 2x2 |
| LTE MIMO UL | 1x1 |
| LTE FDD Bands | 1, 3, 5, 7, 8, 20, 28, 32 |
| LTE TDD Bands | 38, 40, 41 |
| SIM Slots | 1 (Micro SIM) |
| MiniPCI-e Slots | 1 |
| 2.4 GHz Max Data Rate | 574 Mbit/s |
| 2.4 GHz Chains | 2 |
| 2.4 GHz Standards | 802.11b/g/n/ax |
| 2.4 GHz Antenna Gain | 6.9 dBi |
| 2.4 GHz Chip Model | IPQ-5010 |
| 2.4 GHz Generation | Wi-Fi 6 |
| 5 GHz Max Data Rate | 1200 Mbit/s |
| 5 GHz Chains | 2 |
| 5 GHz Standards | 802.11a/n/ac/ax |
| 5 GHz Antenna Gain | 7 dBi |
| 5 GHz Chip Model | QCN-6102 |
| 5 GHz Generation | Wi-Fi 6 |
| 10/100/1000 Ethernet Ports | 2 |
| CPU Temperature Monitor | Yes |
| PCB Temperature Monitor | Yes |
| Voltage Monitor | Yes |
| Certification | CE, EAC, ROHS |
| IP Rating | IP66 |



