VSOL V1600G0-B 4 Port GPON OLT

vSOL V1600G0-B Layer 3 GPON OLT
Overview: A 4-port, 1U pizza-box Layer 3 GPON OLT built for fast and flexible FTTx access in sparse, remote and cost-sensitive areas, smart industrial parks and commercial buildings.
Description: The V1600G0-B packs four GPON SFP slots into a standard 19-inch 1U chassis. The PON ports operate with Class C++ / Class C+++ optical modules and support a maximum splitting ratio of 1:128. On the uplink side it provides 2× RJ45 (GE) and 2× SFP (GE) / SFP+ (10GE) ports, backed by a 104 Gbps backplane bandwidth and a 47.616 Mpps port forwarding rate. A dedicated 10/100/1000BASE-T out-band management port, a CONSOLE port and a USB 2.0 interface are also available on the front panel.
Layer 2 capabilities include a 32K MAC address table, 4096 VLANs, port and protocol VLAN, VLAN tag/untag, VLAN translation and QinQ, static and dynamic LACP, 802.1D and 802.1W, port-based storm control, port isolation and rate limitation, plus QoS and ACL based on port, VID, TOS and MAC address. On Layer 3 the device supports ARP proxy, 4096 hardware host routes and 512 hardware subnet routes, static routing and dynamic RIP v1/v2, RIPng and OSPF v2/v3. IPv6 support covers NDP, IPv6 Ping, IPv6 Telnet and IPv6 routing, ACL filtering on source/destination IPv6 address, L4 port and protocol type, and MLD v1/v2 snooping. DHCP server, DHCP relay, DHCP snooping and DHCP option82 centralise subscriber IP assignment.
The PON side is compliant with the ITU-T G.984.x standard, reaching up to 20 km transmission distance with 1.244 Gbps upstream and 2.488 Gbps downstream rates over 9/125 μm single-mode fiber with SC/UPC connectors. Its small size and light weight allow deployment in limited room space, basements, low-voltage rooms and small racks or cabinets, and it can share a site or rack with wireless base stations in FTTM scenarios. At 35 W power consumption and with 1×AC, 2×AC, 2×DC or 1×AC + 1×DC power configurations, it reduces investment in trunk fiber, pipe engineering and facilities, lowering both CapEx and OpEx. Management is handled through EMS, WEB, SNMP, Telnet, CLI and SSH v2, including ONT auto-discovery, remote software upgrade, port status monitoring and configuration, user and alarm management, and fan group control.
Key Highlights:
- 4× GPON SFP ports with Class C++ / Class C+++ modules and up to 1:128 splitting ratio
- 2× RJ45 (GE) + 2× SFP (GE) / SFP+ (10GE) uplinks, 104 Gbps backplane, 47.616 Mpps forwarding rate
- Layer 3 GPON OLT architecture with RIP v1/v2, RIPng and OSPF v2/v3 dynamic routing
- Uplink redundancy and link protection via LACP, STP, RSTP and MSTP
- ITU-T G.984.x compliant with 20 km reach, SC/UPC connectors and 9/125 μm SMF
- 1U 19" pizza-box chassis, 35 W power consumption, multiple power configurations, 0 °C ~ +50 °C operating range
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | vSOL |
| Model | V1600G0-B |
| Product Group | GPON Devices / Layer 3 GPON OLT |
| Chassis | 1U 19-inch standard box |
| GPON Ports | 4 (SFP slots) |
| GPON Module Class | Class C++ / Class C+++ |
| Max Splitting Ratio | 1:128 |
| Uplink Ports | 2× RJ45 (GE), 2× SFP (GE) / SFP+ (10GE) |
| Management Ports | 1× 10/100/1000BASE-T out-band, 1× CONSOLE, 1× USB 2.0 |
| Backplane Bandwidth | 104 Gbps |
| Port Forwarding Rate | 47.616 Mpps |
| GPON Line Rate | Upstream 1.244 Gbps, downstream 2.488 Gbps |
| Wavelength | TX 1490 nm, RX 1310 nm |
| TX Power | +4.5 ~ +10 dBm |
| RX Sensitivity | ≤ -30 dBm |
| Saturation Optical Power | -12 dBm |
| Transmission Distance | 20 km |
| Connector | SC/UPC |
| Fiber Type | 9/125 μm SMF |
| GPON Standard | ITU-T G.984.x compliant |
| MAC Address Table | 32K |
| VLAN | 4096 |
| Multicast | IGMP snooping, 2048 IP multicast groups |
| Layer 3 Routing | Static route, RIP v1/v2, RIPng, OSPF v2/v3 |
| Hardware Route Capacity | 4096 host routes, 512 subnet routes |
| DHCP | DHCP server, DHCP relay, DHCP snooping, option82 |
| Management | EMS, WEB, SNMP, Telnet, CLI, SSH v2 |
| Dimensions (L×W×H) | 442 × 229 × 43.6 mm |
| Weight | 2.95 kg net (single power), 4.15 kg gross |
| Power Consumption | 35 W |
| Power Configuration | 1×AC, 2×AC, 2×DC, 1×AC + 1×DC |
| Operating Temperature | 0 °C ~ +50 °C |
| Storage Temperature | -40 °C ~ +85 °C |
| Relative Humidity | 5% ~ 90% (non-condensing) |
