Ubiquiti UniFi Switch Ultra 210W (USW-Ultra-210W)

Ubiquiti USW-Ultra-210W-EU UniFi Switch
Overview: The USW-Ultra-210W-EU is a switching unit from the UniFi Switch product family, intended for office, branch and SMB networks built on the UniFi management ecosystem. Shipped as the -EU variant for the European market, it carries a declaration of conformity with Directives 2014/30/EU (EMC) and 2014/35/EU (LVD).
Description: As a member of Ubiquiti's UniFi switching family, the USW-Ultra-210W-EU is positioned in the access/distribution layer of enterprise networks. It forms part of a switching infrastructure that is managed and monitored through the UniFi management platform, making it suitable for IT teams that standardise on centralised network management. The manufacturer's EU declaration of conformity confirms that the device meets the essential requirements of the electromagnetic compatibility and low-voltage directives.
On the installation side, the manufacturer defines clear operating boundaries. A minimum clearance of 20 mm must be maintained around the ventilation openings; inadequate ventilation may create a fire hazard. The unit must not be exposed to rain or moisture, must not be used in locations that can be submerged by water, and should be avoided during electrical storms. Where magnetic mounting is used, the product must not be mounted above 2 metres in height.
For electrical safety, the device must be powered from a source matching the voltage, frequency and current requirements stated on the manufacturer's label. The supplied detachable power cord includes an integral protective earthing conductor intended for connection to a grounded safety outlet; adapters or substitute cords must not defeat the continuity of the grounding wire. There are no operator-serviceable parts inside the unit, and service must be performed only by a qualified service technician.
Key Highlights:
- Switching hardware within the Ubiquiti UniFi Switch product family
- -EU variant with declaration of conformity to Directives 2014/30/EU (EMC) and 2014/35/EU (LVD)
- Requires at least 20 mm of clearance around ventilation openings for adequate airflow
- Magnetic mounting limited to a maximum installation height of 2 metres
- Detachable power cord with integral protective earthing conductor for grounded safety outlets
- Indoor deployment only; must not be exposed to rain, moisture or submersion
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | Ubiquiti |
| Model | USW-Ultra-210W-EU |
| Product Group | UniFi Switch |
| EU Compliance Directives | 2014/30/EU (EMC), 2014/35/EU (LVD) |
| EU Authorised Representative | Ubiquiti International Holding B.V., Ekkersrijt 3102, Son, Netherlands |
| Declaration of Conformity | ui.com/compliance |




