Ubiquiti UniFi Switch Pro XG 48 PoE (USW-Pro-XG-48-PoE)

Ubiquiti USW-Pro-XG-48-Po UniFi PoE Switch (48 Port)
Overview:
The Ubiquiti USW-Pro-XG-48-Po is a 48-port UniFi switch with up to 600 W of total PoE budget, built for WISP sites, SMB network cores and enterprise office wiring closets that need to power dense populations of access points, IP cameras and VoIP handsets.
Description:
The USW-Pro-XG-48-Po is housed in an SGCC steel chassis measuring 442.4 x 399.6 x 43.7 mm in a 1U form factor, weighing 6.2 kg without mounting brackets and 6.3 kg with them. An internal AC/DC 660 W power supply accepts a universal 100—240V AC input, and a USP RPS DC input is provided at 52V DC / 11.54A and 11.5V DC / 5.22A. Total available PoE is 600 W, while maximum power consumption excluding PoE output is 60 W.
On the switching side the unit provides (48) GbE RJ45 ports and (4) 1/10G SFP+ ports. With 176 Gbps switching capacity, 88 Gbps total non-blocking throughput and a 130.944 Mpps forwarding rate, it aggregates high port density and uplinks in a single chassis. PoE allocation is split into (40) PoE/PoE+ ports (Pins 1, 2+; 3, 6-) and (8) 60W PoE++ ports that also support PoE/PoE+; per-port PSE output reaches 32 W for PoE+ and 64 W for PoE++. PoE mode voltage ranges are 44—57V for PoE and 50—57V for PoE+.
The switch is managed in-band through UniFi Network over its Ethernet management interface. A 1.3" touchscreen LCM on the front panel provides local visibility into Ethernet speed/link/activity, SFP+ speed/link/activity, PoE and RPS status. Air ±16kV and contact ±12kV ESD/EMP protection plus ETSI300-019-1.4 shock and vibration compliance address deployment resilience, with an operating temperature range of -5 to 40° C and 10 to 90% noncondensing operating humidity.
Key Highlights:
- (48) GbE RJ45 ports and (4) 1/10G SFP+ uplink ports
- 600 W total available PoE: (40) PoE/PoE+ ports plus (8) PoE++ ports delivering up to 64 W per port
- 176 Gbps switching capacity, 88 Gbps total non-blocking throughput, 130.944 Mpps forwarding rate
- Internal 660 W AC/DC power supply with USP RPS DC backup input
- 1.3" touchscreen LCM for port, PoE and RPS status at the rack
- In-band UniFi Network management in an SGCC steel 1U enclosure
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | Ubiquiti |
| Model | Ubiquiti USW-Pro-XG-48-Po |
| Product Group | UniFi Switch |
| Management interface | Ethernet In-band |
| Networking interface | (48) GbE RJ45 ports, (4) 1/10G SFP+ ports |
| PoE interface | (40) PoE/PoE+ (Pins 1, 2+; 3, 6-), (8) 60W PoE++; PoE/PoE+ (Pins 1, 2+; 3, 6-) / PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-) |
| Total non-blocking throughput | 88 Gbps |
| Switching capacity | 176 Gbps |
| Forwarding rate | 130.944 Mpps |
| Power method | Universal input 100—240V AC, 50/60 Hz; USP RPS DC input 52V DC, 11.54A / 11.5V DC, 5.22A |
| Power supply | AC/DC, internal, 660W |
| Supported voltage range | 100—240V AC |
| Max. power consumption | 60W (excluding PoE output) |
| Total available PoE | 600W |
| Max. PoE wattage per port by PSE | PoE+: 32W, PoE++: 64W |
| Voltage range PoE mode | PoE: 44—57V, PoE+: 50—57V |
| ESD/EMP protection | Air: ±16kV, contact: ±12kV |
| Display | (1) 1.3" touchscreen LCM |
| Button | Factory reset |
| Enclosure material | SGCC steel |
| Dimensions | 442.4 x 399.6 x 43.7 mm (17.4 x 15.7 x 1.7") |
| Weight | Without mounting brackets: 6.2 kg (13.8 lb); with mounting brackets: 6.3 kg (14 lb) |
| Shock and vibration | ETSI300-019-1.4 Standard |
| Operating temperature | -5 to 40° C (23 to 104° F) |
| Operating humidity | 10 to 90% noncondensing |
| Certifications | CE, FCC, IC |
| LEDs | Ethernet speed/link/activity, SFP+ speed/link/activity, PoE, RPS status |




