Ubiquiti UniFi Switch Flex (USW-Flex)

Ubiquiti USW-Flex Indoor/Outdoor 5-Port PoE Gigabit Switch
Overview: The USW-Flex is a weather-resistant, 5-port Layer 2 Gigabit switch that powers up to four PoE devices from a single PoE uplink. It is purpose-built for WISP field deployments, IP camera clusters, and outdoor access point installations.
Description: The UniFi Switch Flex (USW-Flex) is a configurable Layer 2 Gigabit switch built around five 10/100/1000 Mbps RJ45 ports with the forwarding capacity to process traffic on all ports simultaneously at line rate without packet loss. Port 1 operates as the PoE input, while ports 2-5 deliver 802.3af PoE output with up to 15.4W per port. The total PoE budget scales with the power source used: 8W with 802.3af, 20W with 802.3at, and 46W with 802.3bt or a 50V/60W PoE adapter. Powered from a PoE switch such as the USW-Pro-24-PoE or from a POE-50-60W / POE-50-60W-WH injector, the USW-Flex eliminates the need for a separate AC run at the edge of the network.
The weather-resistant housing is rated for operation from -40 to 55°C at 46W PoE output and from -40 to 65°C at 25W PoE output. The unit can be installed horizontally or vertically and offers versatile desktop, wall, and pole mounting options. For fully exposed outdoor locations, the optional USW-Flex-Utility enclosure — supplied with a 60W PoE adapter, an Ethernet patch cable, clean cable management, and a screw lock for security — provides a protected and tamper-resistant installation. The switch also carries ±16kV air and ±16kV contact ESD/EMP protection along with CE, FCC, and IC certifications.
Management is handled in-band over Ethernet through the UniFi Network Controller. From a single pane of glass, operators can view network topology and configuration, real-time statistics, and debugging metrics, and can apply per-port operation modes (switching or mirroring), network/VLAN configuration, jumbo frame services, and a debug terminal for command-line access. The proprietary Deep Packet Inspection (DPI) engine identifies which applications and IP addresses are consuming the most bandwidth, while multi-site management lets a single cloud-hosted controller administer distributed deployments and multi-tenant environments with logically separated configuration, maps, statistics, guest portals, and administrator accounts per site.
Key Highlights:
- 802.3af/at/bt PoE input on Port 1 with 802.3af PoE output on ports 2-5 (up to 15.4W per port)
- Total PoE budget of 8W / 20W / 46W depending on the power source
- Five 10/100/1000 Mbps RJ45 ports with line-rate, lossless forwarding
- Weather-resistant housing rated down to -40°C for exposed outdoor installations
- Versatile desktop, wall, and pole mounting in horizontal or vertical orientation
- Centralized UniFi Network Controller management with DPI and multi-site support
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | Ubiquiti |
| Model | USW-Flex |
| Product Group | UniFi Switch |
| Networking Interfaces | (5) 10/100/1000 Mbps RJ45 ports |
| Switching | Configurable Layer 2 Gigabit switch |
| Management Interface | Ethernet In-Band (UniFi Network Controller) |
| PoE Input (Port 1) | 802.3af/at (Pins 1, 2+; 3, 6-) — 802.3bt (Pins 1, 2+; 3, 6- and 4, 5+; 7, 8-) |
| PoE Out (Ports 2-5) | 802.3af (Pins 1, 2+; 3, 6-) |
| Max PoE Wattage Per Port | 15.4W |
| Total PoE Power Budget | 802.3af: 8W / 802.3at: 20W / 802.3bt: 46W / PoE adapter: 46W |
| Max Power Consumption (excluding PoE output) | 5W |
| Voltage Range | 802.3af: 44-57V / 802.3at-bt: 50-57V |
| ESD/EMP Protection | ±16kV air, ±16kV contact |
| Operating Temperature | -40 to 55°C (46W PoE output) / -40 to 65°C (25W PoE output) |
| Operating Humidity | 5 to 95% noncondensing |
| LEDs | System status; PoE and Link/Speed/Activity on RJ45 data ports |
| Mounting Options | Desktop, wall, pole |
| Dimensions | 122.5 x 107.1 x 28.0 mm |
| Weight | 230 g |
| Certifications | CE, FCC, IC |



