Ubiquiti UniFi Switch 16 PoE (USW-16-PoE)

Ubiquiti USW-16-POE Managed PoE+ Gigabit Switch
Overview: The Ubiquiti USW-16-POE is a fully managed UniFi switch that combines 16 Gigabit RJ45 ports with 2 × 1 Gbps SFP uplinks and PoE+ power delivery in a single 1U chassis, targeting growing office, SMB and WISP field networks.
Description: The USW-16-POE provides 16 × 10/100/1000 Mbps RJ45 Ethernet ports and 2 × 1 Gbps SFP ports, delivering 18 Gbps total non-blocking throughput, 36 Gbps switching capacity and a 26.78 Mpps forwarding rate. All ports process traffic simultaneously at line rate without packet loss, so dense LAN workloads are handled without contention. A 16384-entry MAC address table, up to 6 aggregations and support for 255 VLANs provide sufficient capacity for mid-sized access-layer segmentation, while the two SFP cages accept fiber uplinks of up to 1 Gbps for direct inter-switch or inter-building connectivity.
Power delivery covers auto-sensing IEEE 802.3af/at PoE+ plus 24V passive PoE, the latter enabled manually through the UniFi Controller. Per-port PoE+ output reaches 34.2W at the PSE with a 50–57V range in 802.3at mode, while passive mode supports 17W per port at 20-27V. The internal 150W AC/DC power supply accepts universal 100-240VAC/50-60 Hz input and draws a maximum of 28W excluding PoE output, allowing UniFi APs, G3 cameras and other 802.3af/at devices to be powered directly from the switch without inline injectors.
Management is handled by the UniFi Controller software, available at no additional charge with no separate licensing or support fees, and a single controller instance can manage multiple logically separated sites through one centralized interface. Per-port configuration includes PoE settings, operation mode (switching, mirroring or aggregate), VLAN assignment, 9216-byte jumbo frames, 802.3x flow control, storm control, spanning tree (RSTP), LACP port aggregation, port isolation and 802.1X (RADIUS) authentication with dynamic VLAN. The Topology view, per-port TX/RX and PoE status plus centralized statistics shorten troubleshooting for field teams. The 443 x 43 x 221 mm 1U chassis ships with rack-mount brackets and can be rack- or wall-mounted, and its -5 to 40° C operating range with ±24 kV ESD/EMP protection suits demanding site deployments.
Key Highlights:
- (16) 10/100/1000 Mbps RJ45 Ethernet ports and (2) 1 Gbps SFP uplink ports
- 18 Gbps total non-blocking throughput, 36 Gbps switching capacity, 26.78 Mpps forwarding rate
- Auto-sensing PoE+ IEEE 802.3af/at plus configurable 24V passive PoE
- Up to 34.2W PoE+ per port at the PSE with a 50–57V range in 802.3at mode
- Internal 150W AC/DC power supply with 28W maximum draw excluding PoE output
- 9216-byte jumbo frames, LACP, 802.1X (RADIUS), storm control and SNMP under centralized UniFi management
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | Ubiquiti |
| Model | USW-16-POE |
| Product Group | UniFi Switch (Managed PoE+ Gigabit Switch) |
| Networking Interfaces | (16) 10/100/1000 Mbps RJ45 Ethernet Ports, (2) 1 Gbps SFP Ethernet Ports |
| Management Interface | Ethernet In-Band (UniFi Controller) |
| Console Port | (1) Serial Console Port |
| Total Non-Blocking Throughput | 18 Gbps |
| Switching Capacity | 36 Gbps |
| Forwarding Rate | 26.78 Mpps |
| MAC Address Table | 16384 |
| Maximum Aggregations | 6 |
| Monitoring Sessions | 1 |
| Maximum VLANs | 255 |
| Power Method | 100-240VAC/50-60 Hz, Universal Input |
| Power Supply | AC/DC, Internal, 150W DC |
| Max. Power Consumption (Including PoE Output) | 150W |
| Max. Power Consumption (Excluding PoE Output) | 28W |
| PoE Interfaces | PoE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-), 24VDC Passive PoE (Pins 4, 5+; 7, 8-) |
| Max. PoE+ Wattage per Port by PSE | 34.2W |
| 802.3at Mode Voltage Range | 50–57V |
| Max. Passive PoE Wattage per Port | 17W |
| 24V Passive PoE Voltage Range | 20-27V |
| Dimensions | 443 x 43 x 221 mm |
| Weight | 2.80 kg (brackets excluded), 2.89 kg (brackets included) |
| Sound Level | 1.7 dBr (Fan Level 0), 10.8 dBr (Fan Level 1, 2, 3) |
| ESD/EMP Protection | Air: ±24 kV, Contact: ±24 kV |
| Shock and Vibration | ETSI300-019-1.4 Standard |
| Operating Temperature | -5 to 40° C |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |



