Ubiquiti UniFi Switch Flex 3-Pack (USW-Flex-3)

Ubiquiti USW-Flex-3 Indoor/Outdoor 5-Port PoE Gigabit Switch
Overview: The Ubiquiti USW-Flex-3 is a weather-resistant, managed 5-port PoE Gigabit switch built for WISPs, system integrators and SMBs that need to extend network access at outdoor or field locations. It is powered through Port 1 via PoE, eliminating the need for a dedicated power run while feeding access points and IP cameras.
Description: The USW-Flex-3 is a configurable Layer 2 Gigabit switch. Its five 10/100/1000 Mbps RJ45 ports provide the forwarding capacity to process traffic on all ports simultaneously at line rate without packet loss. Port 1 operates as the PoE input, accepting 802.3af/at (Pins 1, 2+; 3, 6-) or 802.3bt (Pins 1, 2+; 3, 6- and 4, 5+; 7, 8-), and can also be powered by a 50V/60W PoE adapter. Ports 2-5 deliver 802.3af PoE output, supplying up to 15.4W per port to connected devices.
The total PoE budget scales with the power source: 8W with 802.3af, 20W with 802.3at, and 46W with 802.3bt or the 50V/60W PoE adapter. Maximum power consumption excluding PoE output is 5W, and the switch operates across a 44-57V (802.3af) and 50-57V (802.3at/bt) voltage range. The weather-resistant housing supports -40 to 55°C operation at 46W PoE output and -40 to 65°C at 25W PoE output, with ±16kV air and ±16kV contact ESD/EMP protection for exposed deployments. It can be installed horizontally or vertically using desktop, wall or pole mounts; for fully exposed outdoor locations, the optional USW-Flex-Utility enclosure is recommended.
Management is handled by the UniFi Network Controller. A single pane of glass shows network topology and configuration, real-time statistics and debugging metrics, along with per-port connection speed, duplex mode, TX/RX data rates and VLAN settings. Administrators can configure per-port operation mode (switching or mirroring), network/VLAN settings, jumbo frames and Auto-MDIX. A single cloud-hosted controller can manage multiple distributed sites with multi-tenancy, each with its own configuration, maps, statistics, guest portal and administrator accounts, while Ubiquiti's Deep Packet Inspection (DPI) engine identifies which applications and IP addresses consume the most bandwidth.
Key Highlights:
- Five 10/100/1000 Mbps RJ45 ports with line-rate Layer 2 switching
- 802.3af/at/bt PoE input on Port 1, plus 50V/60W PoE adapter power option
- 802.3af PoE output on Ports 2-5, up to 15.4W per port
- Total PoE budget up to 46W when powered by 802.3bt or a 60W PoE adapter
- Weather-resistant housing rated for -40 to 65°C operation with ±16kV ESD/EMP protection
- Desktop, wall and pole mounting with centralized UniFi Network Controller management, DPI and multi-site support
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | Ubiquiti |
| Model | USW-Flex-3 |
| Product Group | UniFi Switch |
| Networking Interfaces | (5) 10/100/1000 Mbps RJ45 ports |
| Switching Layer | Layer 2 (configurable) |
| Management Interface | Ethernet In-Band |
| PoE Input (Port 1) | 802.3af/at (Pins 1, 2+; 3, 6-) / 802.3bt (Pins 1, 2+; 3, 6- and 4, 5+; 7, 8-) |
| PoE Output (Ports 2-5) | 802.3af (Pins 1, 2+; 3, 6-) |
| Max PoE Wattage Per Port | 15.4W |
| Total PoE Power Budget | 8W (802.3af), 20W (802.3at), 46W (802.3bt or 50V/60W PoE adapter) |
| Max Power Consumption (Excluding PoE Output) | 5W |
| Voltage Range | 44-57V (802.3af), 50-57V (802.3at/bt) |
| ESD/EMP Protection | ±16kV air, ±16kV contact |
| Operating Temperature | -40 to 55°C (46W PoE output), -40 to 65°C (25W PoE output) |
| Operating Humidity | 5 to 95% noncondensing |
| Dimensions | 122.5 x 107.1 x 28.0 mm |
| Weight | 230 g |
| Mounting | Desktop, wall, pole |
| Certifications | CE, FCC, IC |



