Ubiquiti EdgeSwitch 10XP (ES-10XP)

Ubiquiti Switch ES-10XP Managed Gigabit Switch
Overview:
Part of the Ubiquiti EdgeSwitch line, the ES-10XP is a fully managed Gigabit switch positioned for SMB, office and WISP access-layer deployments that require PoE+ power delivery and SFP fiber uplinks. It combines complete management through the web-based EdgeSwitch Configuration Interface and an industry-standard CLI with deep Layer 2 protocol support and Layer 3 static routing.
Description:
The ES-10XP belongs to the EdgeSwitch family within Ubiquiti's EdgeMAX product line. The family is built on a non-blocking switching architecture designed to process traffic on all ports simultaneously at line rate without packet loss; across the EdgeSwitch series the manufacturer specifies total non-blocking throughput from up to 10 Gbps to up to 70 Gbps depending on model, with matching switching capacity.
On the power side, EdgeSwitch models provide auto-sensing IEEE 802.3af/at PoE+ ports as well as a configurable 24V Passive PoE output. 802.3af/at devices automatically receive PoE on detection, while 24V passive PoE devices require the port's passive PoE mode to be enabled manually through the EdgeSwitch Configuration Interface. Across the series the maximum PoE+ wattage per port at the PSE is 34.2W, and the maximum passive PoE wattage per port is 17W. For fiber backbones and uplinks, the family provides SFP ports, with SFP+ ports on higher-capacity models.
On the software side, the platform delivers advanced Layer 2 features including VLAN, Private VLAN and Voice VLAN, MSTP/RSTP/STP, link aggregation, DHCP snooping, IGMP snooping, TACACS+, RADIUS, 802.1X, MAC filtering and ACLs, together with DiffServ/CoS-based QoS and static routing. Management is available through the graphical EdgeSwitch Configuration Interface, an industry-standard CLI accessible via the serial console, telnet and SSH, plus SNMP v1/v2/v3 and IPv6 management. Built-in DHCP server functionality, jumbo frame support, port mirroring, storm recovery and AutoVoIP help shorten commissioning time in the field.
Key Highlights:
- Full management via the web-based EdgeSwitch Configuration Interface and an industry-standard CLI
- Auto-sensing PoE+ (IEEE 802.3af/at) plus configurable 24V Passive PoE support
- SFP-based fiber uplink capability (SFP/SFP+ ports across the series)
- MSTP/RSTP/STP, VLAN (Private/Voice), link aggregation and IGMP/DHCP snooping
- Access security with IEEE 802.1X, RADIUS, TACACS+, MAC filtering and ACLs
- DiffServ, CoS and AutoVoIP for traffic classification and prioritization
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | Ubiquiti |
| Model | Ubiquiti Switch ES-10XP |
| Product Group | EdgeSwitch Series |
| Switching | Advanced Layer 2 switching, Layer 3 static routing |
| Management Interface | (1) RJ45 Serial Port, in-band and out-of-band Ethernet management |
| Management Protocols | Web UI, industry-standard CLI, SNMP v1/v2/v3, SSH 1.5/2.0, Telnet, SCP |
| PoE Support | PoE+ IEEE 802.3af/at (auto-sensing) and 24V Passive PoE |
| Max PoE+ Wattage per Port (PSE) | 34.2W |
| Max Passive PoE Wattage per Port | 17W |
| Spanning Tree | MSTP / RSTP / STP |
| VLAN Support | IEEE 802.1Q port-based VLAN, Private VLAN, Voice VLAN |
| Link Aggregation | IEEE 802.3ad (LAG) |
| Security | IEEE 802.1X, RADIUS, TACACS+, MAC filtering, ACL |
| QoS | DiffServ, CoS, ACL-based classification, AutoVoIP |
| Certifications | CE, FCC, IC |
| ESD/EMP Protection | Air: ±24 kV, Contact: ±24 kV |
| Operating Humidity | 5 to 95% Noncondensing |
PoE, switching and management values in this table are EdgeSwitch series platform specifications.



