MikroTik wAP R Outdoor Access Point (RBwAPR-2nD)

Mikrotik RBwAPR-2nD Outdoor Wireless Access Point
Overview:
Mikrotik wAP R (RBwAPR-2nD) is an IP54-rated 2.4 GHz outdoor wireless access point with a miniPCI-e slot and bundled LTE antennas. It is built for WISPs and system integrators who need wireless coverage outside a building or inside a vehicle (car, bus, train) while hosting their own LTE modem directly on the device.
Description:
wAP R runs on a QCA9531 (MIPSBE) architecture with a single-core 650 MHz CPU, 64 MB of RAM and 16 MB of FLASH storage. RouterOS is preinstalled with a RouterOS License 4 level, so no separate software purchase is required. The compact, weatherproof 185 x 85 x 30 mm enclosure uses passive cooling and carries an MTBF of approximately 100'000 hours at 25°C, with a tested ambient temperature range of -40°C to 60°C.
On the wireless side, the unit supports the 802.11b/g/n (Wi-Fi 4) standard, reaching a 2.4 GHz maximum data rate of 300 Mbit/s over 2 chains with 2 dBi antenna gain. One 10/100 Ethernet port is available for wired devices. The defining feature is the combination of a miniPCI-e slot and a single Mini SIM slot: you can install your own LTE modem and run the cellular uplink directly through the wAP R. Note that the device has no built-in LTE modem — the SIM slot can only be used if an LTE modem is installed in the miniPCI-e slot (not included).
Powering is highly flexible with three DC inputs: 9-30 V DC jack, 9-30 V passive PoE-in over the Ethernet port, and a 9-30 V automotive connector. Maximum power consumption is 6 W, which keeps the energy budget low for vehicle and battery/solar-fed field deployments. The PCB temperature monitor and voltage monitor allow remote supervision of thermal and supply conditions through RouterOS, including threshold-based alerting. A desktop stand is included, so the unit can also be placed indoors near a window. Certifications include CE, FCC, IC, E-MARK, EAC and ROHS.
Key Highlights:
- 802.11b/g/n (Wi-Fi 4) on 2.4 GHz with 2 chains and up to 300 Mbit/s maximum data rate
- One miniPCI-e slot plus one Mini SIM slot with bundled LTE antennas for user-supplied LTE modems (no built-in LTE modem)
- Three powering options: 9-30 V DC jack, 9-30 V passive PoE-in and 9-30 V automotive input
- IP54 ingress protection with a tested operating temperature range of -40°C to 60°C
- Passive cooling, 6 W maximum power consumption and approximately 100'000 hours MTBF at 25°C
- RouterOS License 4 preinstalled, with PCB temperature and voltage monitoring for remote diagnostics
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | Mikrotik |
| Model | RBwAPR-2nD |
| Product Category | Outdoor Access Point |
| CPU | QCA9531 (MIPSBE, single core, 650 MHz) |
| RAM | 64 MB |
| Storage | 16 MB FLASH |
| Operating System | RouterOS (License 4) |
| Wireless Standard | 802.11b/g/n (Wi-Fi 4) |
| 2.4 GHz Max Data Rate | 300 Mbit/s |
| Wireless Chains | 2 |
| 2.4 GHz Antenna Gain | 2 dBi |
| 2.4 GHz Max Transmit Power | 22 dBm |
| Ethernet Ports | 1x 10/100 Ethernet |
| MiniPCI-e Slots | 1 |
| SIM Slots | 1 (Mini SIM) |
| DC Inputs | 3 (DC jack, PoE-in, Automotive) |
| PoE In | Passive PoE, 9-30 V |
| DC Jack Input Voltage | 9-30 V |
| Automotive Input Voltage | 9-30 V |
| Max Power Consumption | 6 W |
| Cooling Type | Passive |
| Ingress Protection | IP54 |
| Dimensions | 185 x 85 x 30 mm |
| Operating Temperature | -40°C to 60°C |
| MTBF | Approximately 100'000 hours at 25°C |
| Certifications | CE, FCC, IC, E-MARK, EAC, ROHS |
| PCB Temperature Monitor | Yes |
| Voltage Monitor | Yes |

