MikroTik SXT LTE6 kit LTE Outdoor Router (RBSXTR&R11e-LTE6)

MikroTik SXT LTE6 kit (RBSXTR&R11e-LTE6) Outdoor LTE CPE
Overview: The MikroTik SXT LTE6 kit is an outdoor LTE CPE designed to provide broadband connectivity in remote locations and rural areas within cellular coverage. Its high-gain antenna design and LTE Cat6 modem make it suitable for WISP and field deployments that require reliable connectivity even where signal conditions are weak.
Description: The SXT LTE6 kit uses an LTE Cat6 modem with carrier aggregation, allowing the device to use multiple bands at the same time. This design is intended to deliver better responsiveness in crowded LTE environments and higher efficiency in weak-signal rural situations. The unit can be deployed to connect buildings in remote locations where cellular coverage exists but phone connectivity may struggle.
On the hardware side, the device is built on MIPSBE architecture with a QCA9531 650 MHz single-core CPU, 64 MB RAM and 16 MB flash storage. It runs RouterOS with a Level 3 license and features passive cooling plus IP54 outdoor protection, with a tested ambient temperature range of -30°C to 60°C. Two 10/100 Ethernet ports are provided; the second port (Ether2) supports passive PoE-out to power another device. Dual Micro SIM slots enable a backup link scenario with a second SIM.
For power, the unit supports 802.3af/at PoE input and a 12-57 V input voltage range, with maximum power consumption of 21 W and 7 W without attachments. Passive PoE-out on Ether2 provides up to 57 V with a 600 mA total current limit for powering secondary field equipment. This combination makes the SXT LTE6 kit a compact LTE connectivity point for WISP, field and temporary installations where wired infrastructure is not available.
Key Highlights:
- LTE Cat6 modem with 300 Mbit/s downlink and 50 Mbit/s uplink capability.
- Carrier aggregation support for more efficient connectivity in dense LTE environments.
- IP54 outdoor protection and a tested operating temperature range of -30°C to 60°C.
- Two 10/100 Ethernet ports, with passive PoE-out on Ether2.
- Dual Micro SIM slots for backup link scenarios.
- 802.3af/at PoE input, 12-57 V input voltage and passive cooling.
Technical Specifications:
| Parameter | Value |
|---|---|
| Brand | MikroTik |
| Model | RBSXTR&R11e-LTE6 |
| Product Group | Outdoor LTE CPE |
| Architecture | MIPSBE |
| CPU | QCA9531 |
| CPU Core Count | 1 |
| CPU Nominal Frequency | 650 MHz |
| Switch Chip Model | QCA9531 |
| RouterOS License | 3 |
| Operating System | RouterOS |
| RAM | 64 MB |
| Storage | 16 MB FLASH |
| MTBF | Approximately 200,000 hours at 25°C |
| Tested Ambient Temperature | -30°C to 60°C |
| DC Inputs | 1 (PoE-IN) |
| Max Power Consumption | 21 W |
| Max Power Consumption Without Attachments | 7 W |
| PoE Input | 802.3af/at |
| PoE Input Voltage | 12-57 V |
| Cooling Type | Passive |
| PoE-Out Port | Ether2 |
| PoE-Out | Passive PoE up to 57 V |
| Low Voltage PoE-Out Current Limit | 600 mA |
| High Voltage PoE-Out Current Limit | 400 mA |
| Max Total Output Current | 600 mA |
| 2G Category | Class 12 |
| 2G Bands | 2 (1900 MHz), 3 (1800 MHz), 5 (850 MHz), 8 (900 MHz) |
| 3G Category | R7 (21 Mbps Downlink, 5.76 Mbps Uplink) / R8 (42.2 Mbps Downlink, 5.76 Mbps Uplink) |
| 3G Bands | 1 (2100 MHz), 2 (1900 MHz), 5 (850 MHz), 8 (900 MHz) |
| LTE Category | 6 (300 Mbit/s Downlink, 50 Mbit/s Uplink) |
| LTE FDD Bands | 1 (2100 MHz), 2 (1900 MHz), 3 (1800 MHz), 5 (850 MHz), 7 (2600 MHz), 8 (900 MHz), 12 (700 MHz), 17 (700 MHz), 20 (800 MHz), 25 (1900 MHz), 26 (850 MHz) |
| LTE TDD Bands | 38 (2600 MHz), 39 (1900 MHz), 40 (2300 MHz), 41n (2500 MHz) |
| TAC | 35666210 |
| 10/100 Ethernet Ports | 2 |
| SIM Slots | 2 (Micro SIM) |
| MiniPCI-e Slots | 1 |
| Mode Button | Yes |
| Certification | CE, EAC, ROHS |
| IP Rating | IP54 |
