MikroTik SXT R LTE Outdoor Router (RBSXTR)
MikroTik RBSXTR Outdoor Access Point (Without LTE Card)
Overview:
MikroTik SXT R (RBSXTR) ships without a factory-installed LTE modem and gives you a built-in LTE antenna, a MiniPCIe slot and two Micro SIM slots so you can deploy it with your own modem card in the field. It is a PoE-powered, IP54-rated platform for WISP field installations, remote site links and outdoor industrial scenarios.
Description:
The SXT R leaves the factory with no modem installed. A 3G/4G/LTE modem card is fitted into the MiniPCIe slot after opening the bottom lid, and the card's antenna pigtails connect to the built-in LTE antenna via uFL connectors. Two Micro SIM slots are provided so you can switch between cellular providers (SIM A is the default slot); the SIM slots and the MiniPCIe slot cannot be used separately. Because module installation requires removing the plastic top cover and the PCB plate, it must be carried out by qualified personnel following ESD precautions. On the network side, the unit provides two 10/100 Ethernet ports with Auto MDI/X automatic cross/straight cable correction, so either straight or crossover cabling can be used. The Mode button can be configured from RouterOS to execute any user-supplied RouterOS script.
The device accepts 18-57 V DC passive PoE or 802.3af/at PoE on the ETH1 port, and the package includes a 24 V adapter and a passive PoE injector. Power consumption without attachments is up to 6 W. The ETH2 port can power another device with PoE, with the PoE LED indicating this state. Front-panel LEDs report power, LTE connection status, LTE signal strength and PoE output.
The unit supports RouterOS v6 software, with the factory-installed version shown under the /system resource menu. Initial provisioning is completed through the QuickSet screen, the RouterOS packages are updated via "Check for updates" and an administrator password is set. If IP connectivity is unavailable, the Winbox tool can reach the device by MAC address from the LAN side. The RouterBOOT reset button supports resetting the configuration to defaults, clearing all configuration, and searching for Netinstall servers. For outdoor installation the unit is rated IP54 and ships with a pole mounting bracket and steel clamp; securing the Ethernet cable to the pole with zip ties close to the unit prevents strain on the port. A grounding screw behind the case door allows the device to be bonded to a grounded mast, substantially reducing the risk of ESD and lightning damage.
Key Highlights:
- MiniPCIe slot for a 3G/4G/LTE modem card plus two Micro SIM slots
- No modem card included; the built-in LTE antenna is already fitted
- Two 10/100 Ethernet ports with Auto MDI/X
- 18-57 V DC passive PoE or 802.3af/at input on ETH1, up to 6 W consumption
- Mode button configurable to run user-supplied RouterOS scripts
- IP54 rating with pole bracket and steel clamp for outdoor mounting
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | MikroTik |
| Model | RBSXTR (WITHOUT LTE CARD) |
| Product Group | Outdoor Access Point |
| Ethernet Ports | 2 × 10/100 Ethernet, Auto MDI/X |
| SIM Slots | 2 × Micro SIM (SIM A default) |
| Expansion Slot | 1 × MiniPCIe (for 3G/4G/LTE modem) |
| Antenna | Built-in LTE antenna |
| Power Input | 18-57 V DC passive PoE / 802.3af/at (ETH1) |
| Power Consumption | Up to 6 W without attachments |
| PoE Output | PoE powering via ETH2 port |
| Operating System | RouterOS v6 |
| Ingress Protection | IP54 |
| Mounting | Pole mounting bracket and steel clamp (included) |
| Package Contents | 24 V adapter and passive PoE injector |

