MikroTik Cube Lite60 60GHz Outdoor Bridge (RBCube-60ad)

Mikrotik RBCube-60ad Cube Lite60 — 60 GHz CPE
Overview: The Cube Lite60 is a cost-effective 60 GHz CPE built for deployments where the 2.4/5 GHz spectrum is crowded: shopping malls, stadiums, industrial parks and dense urban areas. Its compact housing is far less conspicuous than a traditional dish CPE, while delivering effective link distances of up to 800 meters point-to-point and 500 meters point-to-multipoint.
Description: The Cube Lite60 is built around a MIPSBE-architecture QCA9531 CPU running at 650 MHz, paired with 64 MB of RAM and 16 MB of FLASH storage — a resource profile matched to its role as a RouterOS-driven 60 GHz CPE. The unit ships with RouterOS License Level 3 and is ready to use out of the box. A single 10/100 Ethernet port carries both data and power, with passive PoE input accepted across a 12–28 V range. Maximum power consumption is 5 W, and the entirely passive cooling design means there are no moving parts to service. IP54 ingress protection and a tested ambient temperature range of -30°C to 70°C qualify the device for outdoor field installations.
The deployment model is built on the 60 GHz band. Up to eight Cube Lite60 units can associate with a single 60 GHz access point such as the wAP 60G AP or wAP 60Gx3 AP, delivering a stable wireless link that is free from interference generated by 2.4/5 GHz networks. Manufacturer-stated effective distances are up to 800 meters for point-to-point links and up to 500 meters for point-to-multipoint setups. In the manufacturer's Ethernet test results, the unit reaches 98.4 Mbps at 1518-byte packets, 96.3 Mbps at 512-byte packets and 88.9 Mbps at 64-byte packets in bridging fast-path mode — indicating that the practical capacity of the 100 Mbps Ethernet interface is largely usable.
RouterOS turns the Cube Lite60 into a manageable network node rather than a plain wireless bridge. Alongside bridging, the same operating system supports routing, firewall rules, bandwidth management through simple queues and VPN termination. This makes it a practical building block for WISP expansion projects, inter-building connectivity for SMBs and general field deployments, all controlled through a single management interface.
Key Highlights:
- 60 GHz operation for links isolated from 2.4/5 GHz interference
- Effective range of up to 800 m point-to-point and 500 m point-to-multipoint
- Up to eight CPE units can be connected to a single 60 GHz access point (wAP 60G AP / wAP 60Gx3 AP)
- QCA9531 650 MHz MIPSBE CPU with 64 MB RAM, 16 MB FLASH and RouterOS License Level 3
- Passive PoE input at 12–28 V with 5 W maximum power consumption and fully passive cooling
- IP54 protection, -30°C to 70°C operating temperature and a compact 130 x 130 x 132 mm housing
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | Mikrotik |
| Model | RBCube-60ad |
| Product Category | Wireless Bridge (P2P / PTP) / 60 GHz CPE |
| Operating Frequency | 60 GHz |
| CPU | QCA9531, 650 MHz, single core |
| Architecture | MIPSBE |
| RAM | 64 MB |
| Storage | 16 MB FLASH |
| Operating System | RouterOS (License Level 3) |
| Ethernet Port | 1 x 10/100 Ethernet |
| Effective Distance (P2P) | Up to 800 m |
| Effective Distance (P2MP) | Up to 500 m |
| Power Input | 1 x PoE-IN (Passive PoE) |
| PoE Input Voltage | 12–28 V |
| Max Power Consumption | 5 W |
| Cooling Type | Passive |
| IP Rating | IP54 |
| Dimensions | 130 x 130 x 132 mm |
| Operating Temperature | -30°C to 70°C |
| MTBF | Approximately 100,000 hours at 25°C |
| Certification | CE, FCC, IC, EAC, ROHS |

