Ubiquiti airMAX PowerBeam 5AC 500 ISO (PBE-5AC-500-ISO)

Ubiquiti PBE-5AC-500-ISO Outdoor Access Point
Overview: The Ubiquiti PowerBeam ac PBE-5AC-500-ISO is a high-performance 5 GHz airMAX ac bridge/CPE with 27 dBi gain. It delivers reliable, high-throughput wireless connectivity for long-range PtP and PtMP links in WISP and enterprise networks.
Description: The PowerBeam ac PBE-5AC-500-ISO is an outdoor CPE device featuring a 500 mm dish antenna with 27 dBi gain, utilizing Ubiquiti's airMAX ac technology. Its InnerFeed® design integrates the radio directly into the feedhorn, eliminating cable losses and improving performance. The device's narrow beamwidth focuses RF energy in a single direction, enhancing noise immunity—especially important in crowded RF environments with other signals in the same or similar frequency. It is equipped with a 720 MHz Atheros MIPS 74Kc processor, 128 MB DDR2 RAM, and 16 MB Flash memory. It is powered via 24V passive PoE with a maximum power consumption of 8.5W. The 10/100/1000 Ethernet interface provides gigabit connectivity. The device operates in temperatures from -40°C to 70°C and withstands wind speeds up to 96 km/h. Its industrial-grade construction includes a galvanized steel dish and brackets, GEOMET-coated fasteners, and an included protective radome, making it suitable for harsh outdoor conditions.
The PowerBeam ac runs on the airOS® v7 operating system, which offers advanced wireless features such as airMAX ac protocol support, long-range PtP link mode, selectable channel width (10/20/30/40/50/60/80 MHz for PtP, 10/20/30/40 MHz for PtMP), automatic channel selection, automatic/manual transmit power control, automatic distance selection (ACK timing), and strong WPA2 security. It also includes a multi-radio architecture for advanced RF analytics (EVM constellation diagrams, CINR histograms, SNR time-series plots) and the airView® Spectrum Analyzer (available with a firmware upgrade to airOS v7.1), providing powerful diagnostic tools for network planning and troubleshooting. The device supports up to 450+ Mbps real TCP/IP throughput and uses the TDMA airMAX protocol to deliver low latency, high scalability, and efficiency.
Key Highlights:
- 5 GHz operation with 27 dBi gain
- 500 mm dish antenna and included protective radome
- InnerFeed® integrated radio design (no cable loss)
- 720 MHz Atheros MIPS 74Kc processor, 128 MB DDR2 RAM
- 24V passive PoE, maximum 8.5W power consumption
- airOS v7 with advanced RF analytics and airView spectrum analyzer support
- Up to 450+ Mbps real TCP/IP throughput
- Industrial-grade outdoor enclosure, operating temperature -40°C to 70°C
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | Ubiquiti |
| Model | PBE-5AC-500-ISO |
| Product Type | Outdoor Access Point |
| Frequency | 5 GHz (5150 - 5875 MHz) |
| Gain | 27 dBi |
| Dish Diameter | 500 mm |
| Processor | Atheros MIPS 74Kc, 720 MHz |
| Memory | 128 MB DDR2, 16 MB Flash |
| Networking Interface | (1) 10/100/1000 Ethernet Port |
| Power Supply | 24V, 0.5A Gigabit PoE |
| Max. Power Consumption | 8.5W |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Supported Voltage Range | 20-26 VDC |
| Output Power | 24 dBm |
| Channel Sizes | PtP: 10/20/30/40/50/60/80 MHz; PtMP: 10/20/30/40 MHz |
| Polarization | Dual Linear |
| Max. VSWR | 1.5:1 |
| ESD/EMP Protection | Air: ±24 kV, Contact: ±24 kV |
| Operating Temperature | -40 to 70° C |
| Operating Humidity | 5 to 95% Noncondensing |
| Wind Survivability | 96 km/h |
| Mounting | Pole-Mount (Kit Included) |
| Enclosure | Outdoor UV Stabilized Plastic |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |



