Ubiquiti airMAX PowerBeam 5AC 400 ISO (PBE-5AC-400-ISO)

Ubiquiti PBE-5AC-400-ISO 5 GHz airMAX ac Bridge with RF Isolated Reflector
Overview:
The PBE-5AC-400-ISO is a 5 GHz airMAX ac bridge with 25 dBi gain and a 400 mm reflector, designed for PtP and PtMP links in RF-congested environments. Its integrated RF isolator and focused beamwidth improve noise immunity for WISP and field deployments.
Description:
The PBE-5AC-400-ISO is designed for 5 GHz airMAX ac bridge deployments with a 400 mm dish reflector and 25 dBi gain. The RF isolator integrated into the reflector directs RF energy in a tighter beamwidth and spatially filters interference from other signals on the same or similar frequencies. InnerFeed technology integrates the radio into the feedhorn, eliminating cable losses, while the metal-plated interior of the rear housing provides RF shielding. The mounting bracket offers ± 20° of mechanical tilt, and a pole-mount kit is included.
The device runs airOS v7 and the airMAX ac TDMA protocol. The TDMA time-slot architecture reduces hidden node collisions and maximizes airtime efficiency. Channel sizes are 10/20/30/40/50/60/80 MHz in PtP mode and 10/20/30/40 MHz in PtMP mode. airOS v7 provides automatic channel selection, automatic or manual transmit power control, WPA2 security, comprehensive diagnostic tools, and the airView spectrum analyzer. Hardware includes a 560 MHz Atheros MIPS 74Kc processor, 64 MB DDR2 RAM, 16 MB Flash, and (1) 10/100/1000 Ethernet port. Power is supplied by 24V, 0.5A Gigabit PoE, with maximum power consumption of 8.5W.
The PBE-5AC-400-ISO can be used on both sides of a PtP link or as a CPE in airMAX PtMP networks. airMAX ac technology supports up to 256QAM modulation and the platform provides up to 450+ Mbps real TCP/IP throughput. It is built for field operation with 200 km/h wind survivability, -40 to 70°C operating temperature, and ± 24 kV ESD/EMP protection.
Key Highlights:
- 5 GHz airMAX ac bridge with 25 dBi gain and 400 mm dish reflector.
- Integrated RF isolator and InnerFeed design improve noise immunity and reduce cable losses.
- 560 MHz Atheros MIPS 74Kc processor, 64 MB DDR2 RAM, and 16 MB Flash.
- (1) 10/100/1000 Ethernet port; powered by 24V, 0.5A Gigabit PoE.
- airOS v7 and airMAX ac TDMA protocol; PtP channel sizes 10-80 MHz, PtMP 10-40 MHz.
- ± 20° mechanical tilt, 200 km/h wind survivability, and -40 to 70°C operating temperature.
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | Ubiquiti |
| Model | PBE-5AC-400-ISO |
| Product Group | AirMAX AC Series |
| Frequency Band | 5 GHz |
| Gain | 25 dBi |
| Dish Reflector | 400 mm |
| Dimensions | 459 x 459 x 261 mm (18.07 x 18.07 x 10.28 in) |
| Weight | 3.22 kg (7.10 lb) |
| Power Supply | 24V, 0.5A Gigabit PoE |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Supported Voltage Range | 20-26VDC |
| Max. Power Consumption | 8.5W |
| Operating Frequency | 5150 - 5875 MHz |
| Networking Interface | (1) 10/100/1000 Ethernet Port |
| Processor Specs | Atheros MIPS 74Kc, 560 MHz |
| Memory | 64 MB DDR2, 16 MB Flash |
| LEDs | (1) Power, (1) LAN, (4) WLAN |
| Signal Strength LEDs | Software-Adjustable to Correspond to Custom RSSI Levels |
| Channel Sizes (PtP) | 10/20/30/40/50/60/80 MHz |
| Channel Sizes (PtMP) | 10/20/30/40 MHz |
| Max. VSWR | 1.5:1 |
| Built-In Mechanical Downtilt | ± 20° |
| Polarization | Dual Linear |
| Enclosure | Outdoor UV Stabilized Plastic |
| Mounting | Pole-Mount Kit Included |
| Wind Loading | 559 N @ 200 km/h (125.7 lbf @ 125 mph) |
| Wind Survivability | 200 km/h (125 mph) |
| ESD/EMP Protection | Air: ± 24 kV, Contact: ± 24 kV |
| Operating Temperature | -40 to 70° C (-40 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |
| Output Power | 25 dBm |




