Ubiquiti airMAX PowerBeam 5AC 400 (PBE-5AC-400)

Ubiquiti PBE-5AC-400 Outdoor Access Point
Overview: The Ubiquiti PBE-5AC-400 combines 5 GHz airMAX ac technology with a 25 dBi gain, 400 mm dish reflector for outdoor CPE/bridge deployments. It is designed for WISP PtP links and PtMP client installations where tight beamwidth, InnerFeed integration, and improved noise immunity are required.
Description: The PBE-5AC-400 is the 25 dBi, 400 mm dish reflector model in the PowerBeam ac series. Ubiquiti InnerFeed technology integrates the radio into the feedhorn, eliminating the need for a cable and removing cable losses to improve RF performance. Its uniform, tightly focused beamwidth spatially filters noise, which is especially important in areas crowded with other RF signals of the same or similar frequency.
The device runs airOS v7 and supports the airMAX ac protocol and TDMA-based airMAX technology. airMAX ac supports dense modulation up to 256QAM and can deliver up to 450+ Mbps real TCP/IP throughput. Channel sizes are 10/20/30/40/50/60/80 MHz in PtP mode and 10/20/30/40 MHz in PtMP mode. The airOS v7 interface provides dynamic configuration changes, HTML5-based usability, and comprehensive diagnostic tools; the airView spectrum analyzer is available with an airOS v7.1 firmware upgrade.
For outdoor deployment, the PBE-5AC-400 uses a UV-stabilized plastic enclosure, galvanized steel dish and brackets, GEOMET-coated fasteners, and an included pole-mount kit. It offers 20° uptilt and 10° downtilt mechanical adjustment, quick assembly, and push-button antenna feed removal for easier field installation. A protective radome is available as an optional accessory for the PBE-5AC-400.
Key Highlights:
- 5 GHz airMAX ac technology with 25 dBi gain and 400 mm dish reflector
- InnerFeed integrated radio/feedhorn design eliminates cable losses
- 256QAM modulation and up to 450+ Mbps real TCP/IP throughput
- airOS v7, TDMA airMAX protocol, and airView spectrum analyzer via airOS v7.1
- 24V, 0.5A Gigabit PoE and (1) 10/100/1000 Ethernet port
- 20° uptilt / 10° downtilt mechanical tilt and included pole-mount kit
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | Ubiquiti |
| Model | PBE-5AC-400 |
| Product Group | Outdoor Access Point |
| Dish Reflector | 400 mm |
| Dimensions | 420 x 420 x 275 mm (16.54 x 16.54 x 10.83") |
| Weight | 1.753 kg (3.87 lbs) |
| Power Supply | 24V, 0.5A Gigabit PoE |
| Max. Power Consumption | 8.5W |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Supported Voltage Range | 20-26VDC |
| Operating Frequency | 5150 - 5875 MHz (Worldwide); USA: U-NII-1 5150-5250 MHz, U-NII-2A 5250-5350 MHz, U-NII-2C 5470-5725 MHz, U-NII-3 5725-5850 MHz |
| Gain | 25 dBi |
| Networking Interface | (1) 10/100/1000 Ethernet Port |
| Processor | Atheros MIPS 74Kc, 560 MHz |
| Memory | 64 MB DDR2, 16 MB Flash |
| LEDs | (1) Power, (1) LAN, (4) WLAN |
| Signal Strength LEDs | Software-Adjustable to Correspond to Custom RSSI Levels |
| Max. VSWR | 1.5:1 |
| Channel Sizes | PtP: 10/20/30/40/50/60/80 MHz; PtMP: 10/20/30/40 MHz |
| Polarization | Dual Linear |
| Enclosure | Outdoor UV Stabilized Plastic |
| Mounting | Pole-Mount (Kit Included) |
| Mechanical Tilt | 20° uptilt, 10° downtilt |
| Wind Loading | 278.4 N @ 120 km/h (63 lbf @ 75 mph) |
| Wind Survivability | 120 km/h (75 mph) |
| ESD/EMP Protection | Air: ±24 kV, Contact: ±24 kV |
| Operating Temperature | -40 to 70° C (-40 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Wireless Approvals | FCC, IC, CE |
| RoHS Compliance | Yes |
| Salt Fog Test | IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5 |
| Vibration Test | IEC 68-2-6 |
| Temperature Shock Test | IEC 68-2-14 |
| UV Test | IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4 |
| Wind-Driven Rain Test | ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5 |
| Output Power | 25 dBm |