LA196108 8P Network Pliers/Portable Ethernet Network Tool

MikroTik netPower Lite 8P (CSS610-8P-2S+OUT) 8-Port PoE Switch with Built-In UPS
Overview: A compact field switch with eight Gigabit PoE ports and two 10G SFP+ uplinks that keeps powering your devices when the grid goes down, thanks to a built-in UPS and smart charger for an external 24 V battery. Built for WISP sites, CCTV deployments, apartment buildings and smart-city cabinets where uptime cannot be negotiated.
Description: The netPower Lite 8P is built around the 88E6193 switch chip and provides eight 10/100/1000 Ethernet ports, all of which deliver 802.3af/at PoE output. A 120 W total PoE budget lets you feed IP cameras and access points from a single device, while two 10G SFP+ cages provide high-speed backhaul. The non-blocking switching architecture reaches up to 56 Gbps of Layer 1 capacity. Passive cooling means no fans and no moving parts, which suits sealed outdoor enclosures and remote cabinets.
On the power side, the unit accepts 24–57 V DC through a 2-pin terminal and offers three DC inputs. Connect an external 24 V nominal battery — typically two 12 V units in series — and the switch becomes a small, efficient UPS: during an outage, PoE devices stay online without interruption. The charger subsystem operates in a 0.2–1.6 A current range at 20–31.7 V and supports flooded, AGM and gel lead-acid batteries as well as LiFePO₄ packs with a proper BMS. The included temperature sensor fine-tunes voltage for lead-acid batteries and blocks charging outside a safe temperature range to prolong battery life. When incoming power is limited, PoE is prioritized automatically — charging slows down first so essential devices remain online. Because the switch can deliver high-voltage PoE output even from low-voltage DC sources, it fits directly into battery-backed field installations.
The netPower Lite 8P is tested for ambient temperatures from -40 °C to +70 °C and carries an IP54 rating. A 2-wire alarm input detects tampering and reports it instantly in SwOS Lite and over SNMP, and can be paired with a RouterOS device for additional automation or scripting triggers. CPU temperature, current and voltage monitors give field teams remote diagnostics. SwOS Lite provides a fast and refreshingly simple Layer 2 management layer, and the device ships with a licensed operating system plus free software updates for the life of the product (minimum five years from purchase date).
Key Highlights:
- 8 Gigabit Ethernet ports with 802.3af/at PoE output on Ether1–Ether8
- 120 W total PoE output budget with automatic PoE prioritization
- 2× 10G SFP+ uplinks for high-speed backhaul
- Built-in UPS switchover and 3-stage smart charger for an external 24 V battery
- Supports flooded, AGM and gel lead-acid batteries plus LiFePO₄ packs with BMS
- -40 °C to +70 °C operating range, IP54 enclosure, fanless passive cooling
Technical Specifications:
| Parameter | Value |
|---|---|
| Manufacturer | MikroTik |
| Model | CSS610-8P-2S+OUT |
| Product Group | PoE Switch |
| Switch chip model | 88E6193 |
| Operating System | SwOS Lite |
| Storage | 64 KB FLASH |
| 10/100/1000 Ethernet ports | 8 |
| 1G Ethernet ports with PoE-out | 8 |
| SFP+ ports | 2 (10G) |
| PoE-out ports | Ether1–Ether8 |
| PoE standard | 802.3af/at |
| Total output power | 120 W |
| Low voltage PoE-Out current limit | 1.0 A |
| High voltage PoE-Out current limit | 0.64 A |
| Number of DC inputs | 3 (2-pin terminal) |
| 2-pin terminal input voltage | 24–57 V DC (battery 22–30 V) |
| Max power consumption | 208 W |
| Max power consumption without attachments | 9 W |
| Battery charging current range | 0.2–1.6 A |
| Battery charging voltage range | 20–31.7 V |
| Cooling type | Passive |
| Tested ambient temperature | -40 °C to +70 °C |
| IP rating | IP54 |
| CPU temperature monitor | Yes |
| Current monitor | Yes |
| Voltage monitor | Yes |
| Alarm input | 2-wire contact |
| Switching capacity | 56 Gbps (non-blocking, Layer 1) |
| MTBF | Approximately 200,000 hours at 25 °C |
| Certification | CE, EAC, ROHS |